Control Engineering

01FP-02BP
Tow way pneumatic on-off valves, free flow (45°), available in normally closed, normally open or double acting operation, from DN 15 to DN 65, with AISI 304 stainless steel servo control and max. working temperature 190°C.

“FP series”: with AISI 316 stainless steel body, available with the following connections: threaded GAS female, socket welding, NPT threaded, flanged with UNI PN 16 drilling, flanged reduced.

“BP” series: with Rg 5 bronze body and available with threaded GAS female connections. For further information please refer to 01FP-02BP catalogue.

04GP
Tow-way pneumatic on-off valves, conveyed flow, available in normally closed, normally open or double acting operation, from DN 15 to DN 100. Grey iron body and AISI 304 stainless steel servo control, max. working temperature 190° C. For further information please refer to 03FA catalogue

06SQ98-SQ-SQT
Square pneumatic on-off valves, available in normally closed, normally open or double acting operation, with AISI 304 stainless steel servo control.

“SQ98” series: with AISI 316 stainless steel cast body, available from DN 8 to DN 50, with the following connections: threaded GAS female, socket welding, end and flanged with UNI PN 16 drilling, flanged reduced, max. working temperature 190º C.

“SQ” series: with AISI 316 stainless steel square body, from electro welded sheet, available from DN 65 to DN 200, with the following connections: butt welding, flanged with UNI PN 16 drilling, flanged reduced, max. working temperature 150º C.

“SQT” series: three-way diverting version of “SQ98” and “SQ” models; available from DN 15 to DN 150, with the same characteristics as the “SQ” series. For further information please refer to 06SQ98-SQ-SQT catalogue.

 

11M9-2
Tow-way pneumatic control valves with spheroidal cast iron body, available from DN 15 to DN 100 operated by membrane servo control type: SSO (Ø200), SS1 (Ø275), SS3 (Ø360), SS2 (Ø430), SS4 (Ø430 special valve).
For further information please refer to 11m9-2 catalogue.

14FW-15LU
Total seal bidirectional butterfly valves, available from DN 30 to DN 600, with body in nodular cast iron, carbon steel or AISI 316 stainless steel.

the gasket material can be chosen among: BUNA N, EPDM HT, PTFE, Vition, Silicone, Hypalon, Neoprene and Natural Rubber.

The disk is available in spheroidal cast iron, carbon steel or AISI 316 stainless steel

Valves can be operated through: manual lever, double/simple acting pneumatic actuator, mechanical reduction gear with hand wheel, electric reduction gear.

"FW" Series: with Wafer body
"LU" series: with LUG body

 

 

17S0
Conductivity level probes in AISI 316 stainless steel,wiht 1/2" GAS standard connections (male threaded) Sheaths in PTEF (max.working- temperature 90° C)

"SO" series: variable length
"SOF" series: fixed length

18PD
Simple/double acting metering built in AISI 316 stainless steel, equipped with unidirectional suction/delivery check valves, entrance filter and magnetic sensors.

The simple action model is built in the standard versions with the following capacities expressed in cu cm: 30,70,110,125,250. the double acting model features the following cu cm capacities: 150,250.450,900,1300. in case of special requirements , models can be built on request

23AP
Simple/Double acting pneumatic with 90° angle of rotation feature a wide range of torques to meet any customer requirement.

The lower part is drilled to be fixed to the valve in compliance with ISO 5211/Din 3337 standards, while the solenoid valve interface, the upper shaft edge and the upper drilling for fixing the accessories are in compliance with VDI/VDE 3845 NAMUR standards.

A wide range of accessories can be fitted on them, such as: limit switches, solenoid valve, positioned, disengagable gear, level etc

26MAN
Manual valves with free flow body, available from DN 15 to DN 65 , with the following connections: threaded GAS female, socket welding, NPT threaded, flanged with UNI PN 16 drilling, flanged reduced.

AISI 316 stainless steel cast body, max.working temperature 190° C,
.

 

 

33MI
Pneumatic on-off valves- square "MI01SQ" series and free flow "MI01FP" series can be supplied in the normally closed, normally open versions and work at a max. temperature of 160 C

the outstanding feature of these valves is their reduced overall dimensions allowing to effectively solve the problem of lack of space inside the plants.

"MI01SQ" series: available from DN 8 to DN 25 with the following connection: threaded GAS female, threaded Gas ,male, flanged. square valve body(90°) in AISI 316 stainless steel and one AISI 304 stainless steel servo control for all nominal diameters.

"MI01FP" series: with the same characteristics as "MI01SQ" series except for the free flow body(45°): available from DN 15 to DN25, with threaded GAS female and flanged connections

38M
Two-Way ("MA" and "MN" series) or three-way ("MNT" series), on-off, pneumatic valves for low rates. thanks to their very small dimensions, these valves are ideal for use in plants with space problems. "MA" series: body made of AISI 316 stainless steel, available in size DN 5 or DN 8, female GAS thudded fittings, and aluminum or AISI 304 stainless steel servcontrol; suitable for a maximum operating temperature of 150° C. "MN" series: body made of AISI 316 stainless steel, available in size DN 5 only, female GAS threaded fittings, or socket welded, and AISI 304 stainless steel servcontrol; suitable for a maximum operating temperature of 160° C "MNT" series: features the same characteristics as the "MN" series except that it is a three-way valve.

39 M8
The two-way, pneumatic, control valves of the "M8" series have a grey cast iron body, are available from sizes DN 15 to size DN 50, and are operated by a diaphragm servo control of type SS0(0200). SS1(0275), SS3(0360), or ss2(0430). Maximum operating temperature: 190° C

the"M8" series modulating valves are particularly appealing for their features and good value.

 

 

41RI
Self-actuated pressure reducing valves. the item is available from DN 15 to DN 150 with cast iron, spheroidal cast iron or steel bodies. A most important feature is the simplicity of their construction and they are easy to install